-
CY (標準型系列)
通用性較強，手動左右推拉，自動夾持，要有T槽
Strong versatility, manual left-right push-pull, automatic clamping, with T slot
-
CY-C (氣缸移動式)
自動推拉夾持，模具要求夾持方式統一(上下夾持或左右夾持)，要有T槽
Automatic push-pull clamping, die clamping mode required to be unified (upper and lower clamping or left and right clamping), with T slot
-
CY-Ⅰ (固定式)
適合模具底板統一標準化場所，夾模器不作移動，無需T槽。
It is suitable for the unified standardization of the bottom plate of the die,and the clamping device does not move.No T slot is needed.
-
CY-Ⅱ (導軌式)
適合小噸位機器左右夾持，無需T槽，能在區塊內滑移的夾模器，
模具底板寬度差異小于100mm
Suitable for small tonnage machine left and right clamping,without T groove,can slip in the block clamp,the width difference of the bottom plate of the die is less than 100mm.
-
CY-H (耐高溫式)
適合高溫、粉塵環境中手動左右推拉，夾模器要有T槽，壓鑄機為主
Suitable for high temperature, dust environment, manual left-right push pull, Clamper damping,T slot, die-casting machine mainly.
-
CX(伸縮式)
適合沖床和立式注塑機使用，手動推拉，自動夾持，
需要模具底板統一標注化，設備需要T型槽
It is suitable for punch press and vertical injection molding machine. It can be pushed and pulled manually and clamped automaticall.The mold base plate should be marked uniformly.The equipment needs T-groove
1.png "注塑機1")
二回路使用于固定模交叉方式夾持
